{"id":31030,"date":"2026-08-11T08:25:19","date_gmt":"2026-08-11T08:25:19","guid":{"rendered":"https:\/\/doingcable.com\/?p=31030"},"modified":"2026-08-11T08:25:20","modified_gmt":"2026-08-11T08:25:20","slug":"what-is-a-copper-rod-cold-rolling-machine","status":"publish","type":"post","link":"https:\/\/doingcable.com\/tr\/what-is-a-copper-rod-cold-rolling-machine\/","title":{"rendered":"Bak\u0131r \u00c7ubuk So\u011fuk Haddeleme Makinesi"},"content":{"rendered":"

A bak\u0131r \u00e7ubuk so\u011fuk hadde makinesi<\/strong> is a precision multi-stand rolling mill that reduces the diameter of up-cast oxygen-free or low-oxygen copper rod (typically \u03a617 mm or \u03a620 mm) to finished sizes of \u03a66.8\u2013\u03a68.0 mm at room temperature through successive compressive deformation. The process operates below the recrystallization temperature of copper, producing a denser grain structure, higher dimensional accuracy, improved surface finish, and enhanced drawability for subsequent wire drawing used in power cables, control cables, magnet wire, and building wire.<\/p>\n\n\n\n

Two main configurations are used in modern cable conductor production: two-roller (horizontal-vertical alternating) mills and three-roller (Y-type) mills. Both close internal porosity and micro-cracks inherent in continuous up-casting, refine grain size (typically to ~1.1 \u03bcm versus ~2.5 \u03bcm in pure drawing under comparable strain), and deliver roundness of \u22640.2 mm while maintaining conductivity \u2265100\u2013101 % IACS after proper processing.<\/p>\n\n\n\n

\n
inquiry Now<\/a><\/div>\n<\/div>\n\n\n\n

How Does Copper Rod Cold Rolling Work and What Metallurgical Advantages Does It Provide?<\/h3>\n\n\n\n

Cold rolling applies pure compressive force between precision rollers rather than tensile drawing. The rod passes through a series of 8\u201310 stands with oval-round or triangle-round pass schedules. Each stand reduces cross-section by a controlled ratio (typically 1.15\u20131.4 per pass), producing total elongation while work-hardening the material in a controlled manner.<\/p>\n\n\n\n

Key metallurgical results include:<\/p>\n\n\n\n

    \n
  • Closure of casting defects (porosity, blowholes, micro-cracks), reducing downstream wire breakage by 15\u201330 %.<\/li>\n\n\n\n
  • Finer, more uniform grain structure that improves both tensile strength and electrical conductivity.<\/li>\n\n\n\n
  • Superior surface quality free of die marks common in drawing.<\/li>\n\n\n\n
  • Higher density and better fatigue resistance for fine-wire and magnet-wire applications.<\/li>\n<\/ul>\n\n\n\n

    Emulsion cooling and thin-oil lubrication systems keep roll temperature stable and prevent surface oxidation or contamination.<\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    What Are the Main Types of Copper Rod Cold Rolling Machines and Their Technical Comparison?<\/h3>\n\n\n\n

    Selection depends on required output diameter accuracy, production volume, and alloy type (pure copper or Cu-Mg, Cu-Ag, Cu-Sn alloys).<\/p>\n\n\n\n

    Yap\u0131land\u0131rma<\/th>Inlet Diameter<\/th>Outlet Diameter<\/th>Kapasite (t\/saat)<\/th>Final Speed (m\/s)<\/th>Stands<\/th>Main Motor<\/th>Roundness<\/th>Preferred Application<\/th><\/tr><\/thead>
    Two-roller (H-V)<\/td>\u03a617 \/ \u03a620 mm<\/td>\u03a67.8 mm<\/td>\u22642,2<\/td>Max 2.15<\/td>8 \/ 10<\/td>110\u2013132 kW<\/td>\u22640.2 mm<\/td>Standard ETP \/ OF copper for power & building cable<\/td><\/tr>
    Three-roller (Y-type)<\/td>\u03a617 \/ \u03a620 mm<\/td>\u03a66.8 \/ \u03a67.8 \/ \u03a68.0 mm<\/td>1.5\u20133.6<\/td>Max 2.15<\/td>8 \/ 10<\/td>110\u2013132 kW<\/td>\u22640.2 mm<\/td>Alloy rods, higher precision, lower ovality<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Three-roller Y-type mills provide a more uniform three-dimensional stress state, eliminating torsion and improving roundness for high-end magnet wire and specialty conductors. Two-roller mills remain cost-effective for high-volume standard cable rod.<\/p>\n\n\n\n

    Technical Parameters and Performance Data<\/h3>\n\n\n\n

    Typical industrial specifications for continuous cold rolling lines integrated with up-casting systems:<\/p>\n\n\n\n

    Parametre<\/th>Two-Roller Example<\/th>Three-Roller Example<\/th><\/tr><\/thead>
    Inlet rod diameter<\/td>\u03a617 mm \/ \u03a620 mm<\/td>\u03a617 mm \/ \u03a620 mm<\/td><\/tr>
    Outlet rod diameter<\/td>\u03a67.8 mm<\/td>\u03a66.8 \/ \u03a67.8 \/ \u03a68.0 mm<\/td><\/tr>
    Production capacity<\/td>\u22642.2 t\/h<\/td>1.5\u20133.6 t\/h<\/td><\/tr>
    Final rolling speed<\/td>Max 2.15 m\/s (\u2248129 m\/min)<\/td>Max 2.15 m\/s<\/td><\/tr>
    Number of stands<\/td>8 or 10<\/td>8 or 10<\/td><\/tr>
    Roller diameter<\/td>\u03a6255 mm<\/td>\u03a6255 mm<\/td><\/tr>
    Coil weight<\/td>3\u20134 tons<\/td>3\u20134 tons<\/td><\/tr>
    Control system<\/td>Frequency inverter + PLC + HMI<\/td>Frequency inverter + PLC + HMI<\/td><\/tr>
    Lubrication<\/td>Thin-oil internal circulation<\/td>Thin-oil internal circulation<\/td><\/tr>
    Cooling<\/td>Emulsion external circulation<\/td>Emulsion external circulation<\/td><\/tr>
    Typical power consumption<\/td>85\u2013110 kWh\/t<\/td>85\u2013110 kWh\/t<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Roll materials are commonly Cr12MoV or H13 tool steels for extended service life. Frequency-converter drives deliver 15\u201325 % energy savings versus fixed-speed systems and enable soft-start operation that reduces mechanical stress.<\/p>\n\n\n\n

    Selection Guidelines and Application in Cable Manufacturing<\/h3>\n\n\n\n

    For power-cable and control-cable producers, the cold rolling machine is normally placed immediately after the up-casting line. Selection criteria include:<\/p>\n\n\n\n

      \n
    • Matching inlet diameter to the up-caster output (most commonly \u03a617 mm or \u03a620 mm).<\/li>\n\n\n\n
    • Required final diameter for downstream multi-wire drawing (\u03a68 mm is standard for many medium-voltage and building-wire lines).<\/li>\n\n\n\n
    • Alloy capability when producing copper-magnesium or copper-silver rods for high-strength or high-conductivity applications.<\/li>\n\n\n\n
    • Integration with online laser diameter measurement, automatic coiling, and SCADA\/MES systems for process traceability.<\/li>\n<\/ul>\n\n\n\n

      The resulting rod meets the dimensional, mechanical, and electrical requirements of ASTM B49, EN 1977, and corresponding IEC\/GB standards for electrical conductor rod (conductivity \u2265100 % IACS for ETP grades, higher for oxygen-free grades).<\/p>\n\n\n\n

      Standards, Quality Control and Failure Prevention<\/h3>\n\n\n\n

      Finished rod must satisfy chemical composition, tensile strength, elongation, and conductivity limits defined in ASTM B49 and EN 1977. Critical process controls include emulsion concentration and temperature, roll gap accuracy, and tension management between stands.<\/p>\n\n\n\n

      Common failure modes and prevention:<\/p>\n\n\n\n

        \n
      • Excessive ovality \u2192 correct roll alignment and pass schedule.<\/li>\n\n\n\n
      • Surface scratches or residual oxide \u2192 maintain proper emulsion filtration and descaling.<\/li>\n\n\n\n
      • Premature roll wear \u2192 use high-quality tool-steel rolls and separated lubrication circuits.<\/li>\n\n\n\n
      • Wire breakage in subsequent drawing \u2192 ensure complete closure of casting porosity through adequate total reduction and proper cooling.<\/li>\n<\/ul>\n\n\n\n
        \"\"<\/figure>\n\n\n\n

        Key Technical Points Summary<\/h3>\n\n\n\n

        Copper rod cold rolling machines convert up-cast rod into high-quality intermediate product for cable conductors by applying multi-stand compressive deformation at ambient temperature. The process refines microstructure, eliminates internal defects, improves surface quality, and delivers consistent roundness and conductivity required by modern power, control, and magnet-wire applications. Two-roller and three-roller configurations offer capacity ranges of 1.5\u20133.6 t\/h with energy consumption typically 85\u2013110 kWh\/t. Proper selection and process control directly determine downstream drawing performance and final cable reliability.<\/p>\n\n\n\n

        For engineered copper rod cold rolling solutions matched to your up-casting capacity, target diameter, alloy range, and cable production requirements, \u015eimdi bilgi isteyin<\/strong>.<\/p>\n\n\n\n

        \"\"<\/figure>\n\n\n\n

        <\/p>","protected":false},"excerpt":{"rendered":"

        A copper rod cold rolling machine is a precision multi-stand rolling mill that reduces the diameter of up-cast oxygen-free or<\/p>","protected":false},"author":1,"featured_media":31034,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_joinchat":[],"footnotes":""},"categories":[565],"tags":[],"class_list":["post-31030","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized-en"],"_links":{"self":[{"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/posts\/31030","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/comments?post=31030"}],"version-history":[{"count":1,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/posts\/31030\/revisions"}],"predecessor-version":[{"id":31035,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/posts\/31030\/revisions\/31035"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/media\/31034"}],"wp:attachment":[{"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/media?parent=31030"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/categories?post=31030"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/doingcable.com\/tr\/wp-json\/wp\/v2\/tags?post=31030"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}