مركب التدريع الداخلي شبه الموصل القابل للتشابك 0535 هو مادة تدريع شبه موصلة عالية الجودة من النوع المترابط، مصممة لكابلات الطاقة المعزولة بالبولي إيثيلين المتشابك (XLPE) متوسطة الجهد (MV) والمصنفة حتى 35 كيلو فولت. تم إنتاج هذا المركب المتقدم خصيصًا لعملية الفلكنة عالية الحرارة (HTV)، ويعمل كدرع موصل ودرع عازل مترابط في آن واحد، مما يوفر توزيعًا متجانسًا للمجال الكهربائي، وترابطًا ممتازًا بين الطبقات، وموثوقية طويلة الأمد للكابلات في تطبيقات توزيع الطاقة الصعبة.
الميزات والمزايا الرئيسية
- Superior Surface Quality & Processability: Offers excellent extruding fluidity and fine surface smoothness with minimal pre-cure or scorch risk during high-speed production.
- Stable Electrical Performance: Provides low and consistent volume resistivity at both 20°C and 90°C for reliable stress control.
- Strong Bonding & Conductor Compatibility: Forms excellent adhesion with XLPE insulation while maintaining strong compatibility with both copper and aluminum conductors.
- Anti-Oxidation Protection: Special additives prevent copper conductor oxidation, ensuring clean interfaces and extended service life.
- Mechanical & Thermal Stability: High tensile strength, excellent elongation retention after heat aging, and outstanding hot set performance.
- Low Moisture & Brittleness: Low moisture content and a brittleness temperature of -40°C support reliable performance in extreme environments.
المواصفات الفنية
| المعلمة | القيمة النموذجية | شروط الاختبار / المعيار |
|---|
| Volume Resistivity (20°C) | ≤100 Ω·cm | IEC 60502 |
| Volume Resistivity (90°C) | ≤5000 Ω·cm | IEC 60502 |
| قوة الشد | ≥12 MPa | After aging |
| الاستطالة عند نقطة الكسر | ≥200% | After aging |
| Hot Set (200°C, 20 min) | ≤100% | IEC 60811 |
| Brittleness Temperature | -40°C | ISO 812 |
| Moisture Content | ≤0.1% | Pre-drying requirement |
| Recommended Extrusion Temp | Zone 1: 85–90°C → Flange: 110°C | See processing guide |
Recommended Processing Conditions
Optimized for high-temperature vulcanization extrusion:
- Temperature Profile (°C): Zone 1: 85–90 | Zone 2: 95–100 | Zone 3: 105–110 | Zone 4: 110–115 | Flange: 110–112 | Tube: 110–115 | Screw: 65–70
- Use double-layer filter mesh (40 mesh / 350 μm) for best surface finish.
- Pre-dry material in hopper at 40–60°C for 4 hours to control moisture.
التعبئة والتخزين
Supplied in 600 kg cardboard boxes with inner PE bags for easy handling and protection. Store in a cool, dry environment between 10–30°C. Unopened original packaging offers a recommended shelf life of up to 12 months.
0535 مركب حماية داخلي شبه موصل قابل للتشابك is the preferred choice for cable manufacturers seeking consistent quality, superior bonding, and reliable electrical performance in medium-voltage XLPE power cables.
المراجعات
لا توجد مراجعات بعد.