0535 Cross-linkable Semi-conductive Inner Shielding Compound main

0535 Cross-linkable Semi-conductive Inner Shielding Compound 1

0535 Cross-linkable Semi-conductive Inner Shielding Compound

0535 Cross-linkable Semi-conductive Inner Shielding Compound is a premium bonded-type semi-conductive shielding material designed for medium-voltage (MV) cross-linked polyethylene (XLPE) insulated power cables rated up to 35 kV. Produced for high-temperature vulcanization (HTV) processing, this advanced compound serves as both the conductor shield and bonded insulation shield, delivering uniform electric field distribution, excellent interface bonding, and long-term cable reliability in demanding power distribution applications.

Ajouter à la comparaison

Ajouter à la liste de souhaits

Catégorie : Isolation et gaine Étiquettes : 0535 inner shielding compound, 35kv cable shielding, bonded inner shield, cable compounds, cross-linkable semi-conductive, mv xlpe conductor shield, xlpe cable material

Demande d'informations

Description

Key Features and Advantages

Superior Surface Quality & Processability: Offers excellent extruding fluidity and fine surface smoothness with minimal pre-cure or scorch risk during high-speed production.
Stable Electrical Performance: Provides low and consistent volume resistivity at both 20°C and 90°C for reliable stress control.
Strong Bonding & Conductor Compatibility: Forms excellent adhesion with XLPE insulation while maintaining strong compatibility with both copper and aluminum conductors.
Anti-Oxidation Protection: Special additives prevent copper conductor oxidation, ensuring clean interfaces and extended service life.
Mechanical & Thermal Stability: High tensile strength, excellent elongation retention after heat aging, and outstanding hot set performance.
Low Moisture & Brittleness: Low moisture content and a brittleness temperature of -40°C support reliable performance in extreme environments.

Spécifications techniques

Paramètre	Typical Value	Test Condition / Standard
Volume Resistivity (20°C)	≤100 Ω·cm	IEC 60502
Volume Resistivity (90°C)	≤5000 Ω·cm	IEC 60502
Tensile Strength	≥12 MPa	After aging
Elongation at Break	≥200%	After aging
Hot Set (200°C, 20 min)	≤100%	IEC 60811
Brittleness Temperature	-40°C	ISO 812
Moisture Content	≤0.1%	Pre-drying requirement
Recommended Extrusion Temp	Zone 1: 85–90°C → Flange: 110°C	See processing guide

Recommended Processing Conditions

Optimized for high-temperature vulcanization extrusion:

Temperature Profile (°C): Zone 1: 85–90 | Zone 2: 95–100 | Zone 3: 105–110 | Zone 4: 110–115 | Flange: 110–112 | Tube: 110–115 | Screw: 65–70
Use double-layer filter mesh (40 mesh / 350 μm) for best surface finish.
Pre-dry material in hopper at 40–60°C for 4 hours to control moisture.

Packaging and Storage

Supplied in 600 kg cardboard boxes with inner PE bags for easy handling and protection. Store in a cool, dry environment between 10–30°C. Unopened original packaging offers a recommended shelf life of up to 12 months.

0535 Cross-linkable Semi-conductive Inner Shielding Compound is the preferred choice for cable manufacturers seeking consistent quality, superior bonding, and reliable electrical performance in medium-voltage XLPE power cables.

Avis (0)

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “0535 Cross-linkable Semi-conductive Inner Shielding Compound”

Expédition et livraison

Services de fret maritime international

Nous proposons des services de transport maritime international professionnels et fiables, couvrant les principaux ports du monde. Que votre cargaison soit petite ou grande, proche ou lointaine, nous pouvons adapter la solution de transport à vos besoins spécifiques. Vous êtes libre de choisir. GOUSSET ou CIF (ou d'autres Incoterms) afin de garantir que l'ensemble du processus d'expédition soit transparent, efficace et rentable.

Conditions commerciales flexibles

FOB (Franco à bord)Idéal pour les clients qui préfèrent gérer eux-mêmes l'assurance et le transport ultérieur. Nous nous chargeons de livrer les marchandises en toute sécurité au port de chargement désigné et de procéder au chargement à bord du navire.
CIF (Coût, Assurance et Fret)Idéal pour les clients recherchant un service clé en main. Nous prenons en charge l'intégralité du transport maritime et de l'assurance maritime, du port de chargement au port de destination, réduisant ainsi vos risques opérationnels.
D'autres termes courants tels que FCA, CFR, etc. peuvent également être personnalisés selon vos besoins.

Nous entretenons un vaste réseau de liaisons maritimes et des partenariats de longue date avec les principales compagnies maritimes (dont Maersk, CMA CGM, COSCO, etc.). Ceci garantit une disponibilité d'espace stable, une tarification transparente et des délais de transit fiables. Que vous expédiiez de petits échantillons ou des conteneurs complets (FCL/LCL), vous bénéficierez de solutions de transport maritime professionnelles et complètes.

Produits similaires

Ajouter à la comparaison

Maleic Anhydride Glycidyl Methacrylate Grafted Elastomer Resin

Isolation et gaine

Maleic Anhydride Glycidyl Methacrylate Grafted Elastomer Resin is a high-performance functional polymer produced via reactive extrusion. It uses premium elastomer bases (such as POE, PO, or styrene-olefin elastomers) grafted with maleic anhydride (MAH) or glycidyl methacrylate (GMA) monomers. This advanced grafting technology creates a versatile compatibilizer and toughening agent that significantly improves the compatibility and mechanical performance of engineering plastics in cable compounds and other high-demand applications.

Ajouter à la liste de souhaits

Aperçu rapide

Ajouter à la comparaison

Maleic Anhydride Grafted Polypropylene PE

Isolation et gaine

Maleic Anhydride Grafted Polyethylene (PE-g-MAH) is a high-performance functional polymer produced through reactive extrusion. It uses premium polyethylene bases (LLDPE, m-LLDPE, HDPE, etc.) grafted with maleic anhydride (MAH) monomer. This advanced grafting technology delivers high grafting efficiency, excellent processing performance, and very low impurity content, making it an essential compatibilizer and toughening agent for modified polyolefin systems and cable compounds.

Ajouter à la liste de souhaits

Aperçu rapide

MV Semi-conductive Outer Shielding Material for Power Cables2

Ajouter à la comparaison

MV Semi-conductive Outer Shielding Material for Power Cables

Isolation et gaine

MV Semi-conductive Outer Shielding Material, specifically the 0835 Cross-linkable Semi-conductive Outer Shielding Compound, is a high-performance strippable insulation shield engineered for medium-voltage (MV) cross-linked polyethylene (XLPE) insulated power cables rated up to 35 kV. This advanced semi-conductive compound ensures smooth electrical field distribution at the insulation interface, minimizing partial discharge and enhancing long-term cable reliability in demanding power distribution networks.

Ajouter à la liste de souhaits

Aperçu rapide

Ajouter à la comparaison

Semi-Conductive Bonded Shield Compound R0535

Isolation et gaine

Semi-Conductive Bonded Shield Compound R0535 (also known as RO535) is a high-performance cross-linkable semi-conductive shielding material specifically engineered for medium-voltage (MV) XLPE insulated power cables rated up to 35 kV. Designed for high-temperature vulcanization (HTV) and CCV production lines, this bonded-type compound serves as both the conductor shield and bonded insulation shield, ensuring uniform electric field distribution, excellent interfacial adhesion, and long-term electrical stability in demanding power transmission applications.

Ajouter à la liste de souhaits

Aperçu rapide

Ajouter à la comparaison

Composé isolant XLPE pour câbles moyenne tension

Isolation et gaine

XLPE Insulation Compound (crosslinkable polyethylene insulation compound) is a premium-grade, high-performance insulation material specifically developed for medium-voltage (MV) power cables rated up to 35 kV. Manufactured from high-purity polyethylene resin, dicumyl peroxide crosslinking agent, and advanced antioxidant additives through a precision closed-system plasticizing granulation process, this compound delivers exceptional electrical, thermal, and mechanical properties essential for reliable long-term cable performance.

Ajouter à la liste de souhaits

Aperçu rapide