Machine de blindage concentrique à haute vitesse et entièrement servo pour bande d'acier à double couche

The High Speed Full Servo Concentric Steel Strip Armoring Machine for Double Layer Steel Tape represents advanced engineering for modern cable manufacturing. Unlike conventional half-tangent or eccentric designs, this machine adopts a true concentric structure that significantly reduces centrifugal force and rotational inertia. Combined with full AC servo drive systems and intelligent PLC closed-loop control, it delivers highly stable double-layer steel tape armoring with uniform overlap, precise pitch, and consistent tension across the entire production run.

This equipment is specifically optimized for applying two layers of steel tape (or steel + copper combinations) around cable cores. The resulting armor layer substantially improves resistance to external lateral pressure, mechanical impact, and environmental stress — critical performance requirements for underground power cables, industrial control cables, and special-purpose cables used in demanding installations.

Why Choose a Full-Servo Concentric Design Over Traditional Tangential or Eccentric Armoring Machines?

Full-servo concentric machines rotate the tape pads and armoring head around a common central axis, resulting in lower moment of inertia, shorter braking distances and higher pitch accuracy than conventional tangential systems. Traditional eccentric or semi-cut machines generate larger centrifugal forces at high speed, which increases vibration, tape wrinkling risk and energy consumption. Concentric full-servo systems driven by independent AC servo motors for the tape drums and armoring head allow real-time tension and pitch feedback via encoder + PLC, achieving stable overlap even when the line speed changes between 35–46 m/min.

Key measured advantages from current industrial installations:

• Maximum rotational speed: 600–1000 r/min (product-dependent)
• Tape tension control accuracy: constant from full pad to near-empty
• Pitch stepless adjustment with real-time encoder feedback
• Continuous single-drum operation with rewind function, minimizing downtime for pad change

Principaux avantages techniques

• True Concentric Structure Minimizes centrifugal force compared with traditional half-tangent designs. Lower inertia enables smoother start/stop, reduced vibration, higher operational safety, and lower energy consumption.
• Full Servo Drive System Steel strip reels and tension systems are driven by high-torque AC servo motors. This provides precise torque delivery, short braking distance, excellent dynamic response, and stable tension from full reel to empty reel.
• Intelligent PLC + Encoder Closed-Loop Control Touch-screen HMI + PLC + real-time encoder feedback ensures accurate control of rotation speed and armoring pitch. Parameters can be adjusted on the fly while maintaining pitch consistency within the set range.
• Double-Layer Steel Tape Capability Designed for simultaneous or sequential application of two layers of steel tape, providing enhanced mechanical protection and compressive strength that single-layer systems cannot match.
• Continuous High-Efficiency Operation Large strip storage capacity supports single-drum continuous armoring. Rewind function and fast reel changeover minimize downtime. Maximum rotation speed reaches 1000 rpm (depending on product and strip parameters), with typical line speeds in the 35–46 m/min range for precision cables.
• Material & Process Flexibility Compatible with steel and copper strips. Strip width typically 10–40 mm (or 15–30 mm depending on configuration), thickness 0.2–0.5 mm. Stepless pitch adjustment and independent arm drive allow easy optimization of overlap and angle.

Paramètres techniques typiques

Parameters can be customized according to specific cable diameter, strip specification, and production capacity requirements.

Applications

This machine is widely applied in the production of:

• Medium- and low-voltage power cables requiring steel tape armor
• Control and instrumentation cables
• Communication and special industrial cables
• Cables for underground laying, industrial plants, energy infrastructure, and heavy-duty environments

Double-layer steel tape armoring effectively enhances resistance to external pressure, improves cable integrity during installation and long-term service, and extends overall cable service life.

How Does Double-Layer Steel Tape Armoring Work and What Failure Modes Must Be Prevented?

Double-layer steel tape armoring (DSTA / STA) is applied helically so that the second layer covers the gap of the first layer, providing 100 % radial coverage. This construction delivers superior crush and impact resistance compared with single-layer tape, while remaining more economical than steel-wire armour (SWA) for direct-burial and tray applications that do not require high tensile strength.

Common process failure modes and preventive controls:

• Tape wrinkling or edge folding → caused by excessive tension variation or incorrect pad alignment. Full-servo tension control with continuous diameter compensation eliminates this.
• Insufficient overlap / gap >50 % → results from pitch drift at start/stop. Encoder feedback + PLC pitch lock maintains accuracy.
• Core damage or ovality → occurs when concentricity error exceeds ±0.1 mm. Concentric geometry keeps centrifugal force low and the cable path on the machine centerline.
• Corrosion initiation under armour → prevented by using galvanized steel tape and ensuring clean, dry bedding before armoring.

Selection Guide: When to Specify Full-Servo Concentric Double-Layer Steel Tape Armoring Equipment

Choose this machine class when the cable product portfolio includes:

• Multi-core LV (0.6/1 kV) and MV power cables requiring YJV22 / N2XBY-type construction
• Control and instrumentation cables that need high crush resistance for direct burial or industrial trays
• Production volumes that justify continuous high-speed operation (line speeds >30 m/min)
• Strict compliance with IEC 60502 double-tape rules and GB/T 12706 thickness/gap tolerances

Comparison of armoring methods:

Standards, Material Requirements and Industry Data

IEC 60502-1 and -2 explicitly list double tape armour as a permitted construction. Steel tapes must be hot- or cold-rolled commercial quality (galvanized preferred for corrosion resistance). Nominal thicknesses commonly used are 0.2 mm and 0.5 mm. The outer tape must cover the gap of the inner tape; gap between turns of any single layer ≤50 % of tape width.

GB/T 12706 series (2020 editions) align with the same dimensional and material rules and additionally specify sampling checks for tape overlap and gap. Recent industry data show that concentric full-servo machines achieve OEE improvements of 30–35 % over older mechanical systems because of reduced stoppage for pad change and lower scrap from tension-related defects.

Practical Operating Notes and Long-Term Reliability

• Maintain pad loading within rated weight (typically ≤600 kg) to protect servo torque margins.
• Use the rewind function during continuous armoring to allow seamless pad transfer without line stop.
• Monitor residual tape length and tension set-points via HMI; automatic diameter compensation prevents progressive tension rise as the pad empties.
• Regular calibration of encoder feedback loops ensures pitch remains within the stepless set range across the full speed envelope.

Why This Machine Delivers Long-Term Value

Traditional eccentric or half-tangent armoring machines generate higher centrifugal forces, leading to greater vibration, higher energy use, and less precise pitch control at elevated speeds. The concentric full-servo design overcomes these limitations through lower inertia, closed-loop servo tension and speed control, and real-time pitch feedback. The result is higher production efficiency, reduced material waste, more consistent product quality, and lower maintenance requirements over the machine’s service life.

As an established technology-driven supplier focused on reliable quality and customized technical solutions, we support customers with process consultation, parameter optimization, and long-term cooperation. Machines can be configured to match specific cable standards, production volumes, and plant layouts.

Demande d'informations for detailed technical proposals, customized configurations, or production line integration solutions.